The MEDQOR Podcast Network cover art

The MEDQOR Podcast Network

The MEDQOR Podcast Network

Written by: Medqor
Listen for free

About this listen

 The MEDQOR Podcast Network provides insights, reporting and analysis on MedTech Innovation across all of healthcare. We’re supported by ten leading brands in healthcare, whose chief editors will join us on a recurring basis to talk with key leaders in their industries about what’s happening now.

MEDQOR provides healthcare business intelligence to help MedTech and Pharma professionals connect and stay abreast of the advancing technologies to drive improved patient outcomes. We help healthcare innovators engage their market to bring new technology into hospitals, clinics and offices to improve and streamline patient care.

Thanks for listening as we discuss technology and treatment trends ranging from clear aligner therapy all the way to MRI machines and lab automation equipment. If you enjoy what you hear, please like, subscribe and share.Copyright @ 2023 Medqor Biological Sciences Hygiene & Healthy Living Physical Illness & Disease Science
Episodes
  • Direct 3D-Printed Aligners Redefine Treatment Possibilities A Deep Dive with Dr Ki Beom Kim

    Direct 3D-Printed Aligners Redefine Treatment Possibilities A Deep Dive with Dr Ki Beom Kim
    Aug 17 2023
    Innovation is rampant in orthodontics—to the point that we’re seeing innovation within innovation. Take 3D printing, for example. The 3D printer alone—just the printer itself—has been revolutionary. It has allowed the orthodontic practice to take control and fabricate aligners in-office, on their own schedule. But it wasn’t the 3D printer alone that facilitated this. Along the way, additional innovations were needed—chief among them the thermoforming plastic material. And now, these materials are further evolving with a new material that allows for direct 3D-printed aligners. Orthodontic Products Chief Editor Alison Werner spoke to Ki Beom Kim, DDS, PhD, the Dr Lysle Johnston Endowed Chair in Orthodontics, and the program director in the orthodontic department at the Center for Advanced Dental Education at Saint Louis University, on a recent podcast episode about a new material that allows for direct 3D-printed aligners.Kim and his colleagues have spent the last 3 years testing the Direct Aligner photopolymer material from the South Korean 3D printing material company Graphy. Their findings were recently published in Progress in Orthodontics. The team found that controlling material dimensions, structure, and properties of aligners directly—compared to thermoforming plastic sheets—has the potential to make the process of tooth movement faster, less wasteful, and more precise.“If you have a 3D printer, you can now directly print this aligner without having [a] model, without going through the thermoforming process,” said Kim, adding that, with this new FDA approved material, the in-office lab can skip several steps in the current manufacturing workflow, including cutting out the aligners and polishing before delivery to the patient.What’s more, according to Kim, with a direct printed aligner, the clinician can more precisely control the thickness and insert bumps as needed. Kim shared that he and his team found that when the orthodontist can control the thickness they can “control the geometric inside of the aligner.” That, and the ability to add bumps, creates a huge opportunity for the orthodontist because it helps reduce the need for attachments, he said.For Kim, the shape memory polymer used to make the material is very interesting.He says it somewhat mimics the behavior of NiTi wire. The difference being that a NiTi wire can be exposed to cold temperature to become more flexible, while this Direct Aligner material becomes totally flexible when placed in warm/hot water. The advantage of this shape memory, according to Kim, is that the patient can maintain the shape—and thus the forces—of the aligner at home. Kim points out that patients remove their aligner up to 10 to 20 times a day to eat. “So think about the plastic deformation” every time they remove the aligner, said Kim. But with this material and some warm water, the shape can be restored. Kim uses the analogy of a deformed plastic Coke bottle. Once it’s deformed, it’s not going back to its original shape. But with this material, he can advise patients to put their aligner in warm water at the end of the day if they notice it’s not tight enough. “It will go back to the original shape so they can maintain [a better fit] every day,” he added.Now when it comes to forces, Kim shares he has been able to apply bigger activations per aligner, thus saving time in treatment and decreasing the number of aligners over the course of treatment. With traditional thermoforming plastics, Kim points out, something like a .5 mm activation per aligner can create a force level that causes the patient too much discomfort and even pain. But with this material, Kim can do that.“I’m constantly putting .5 mm activations and even 5° rotation per aligner, and then have patients wear [the aligner] just a little bit longer—maybe 2 weeks. Sometimes we go longer,” said Kim, adding that with a standard activation of .25 mm per aligner, to move 1 mm you need four aligners. “But if I can put .5 mm activation per aligner [and] have them wear [it] for 2 weeks, then I need only two aligners.”In this episode, Kim also talks about the hardware requirements, including 3D printer compatibility with the material needed, and the need for a specific type of curing machine. He also talks about the staging software needed to plan cases using direct 3D-printed aligners. What’s more, he talks about retention and his plans to test an on-site retainer-bending machine from YOAT, a medical technology manufacturer based in Seattle. OP
    Show More Show Less
    31 mins
  • Pathophysiology of Idiopathic Hypersomnia

    Pathophysiology of Idiopathic Hypersomnia
    Aug 17 2023

    While the pathophysiology of idiopathic hypersomnia is unknown, emerging science suggests that nighttime sleep dysfunction may contribute to daytime sleepiness in patients with idiopathic hypersomnia. A systematic review and meta-analysis that included 10 studies found that, on average, several sleep architecture hallmarks were different in patients with idiopathic hypersomnia relative to controls.

    • Total sleep time and percent of REM sleep were increased in patients with idiopathic hypersomnia compared with controls.
    • Sleep-onset latency and percent of slow-wave sleep were decreased in patients with idiopathic hypersomnia compared with controls.
    • Sleep efficiency and REM latency were similar between patients with IH and controls.

    In addition to nighttime sleep dysfunction, other physiological changes have been observed in some patients with idiopathic hypersomnia and theorized as possible contributors to its pathophysiology including:

    • Dysfunction of the GABAergic system
    • Autonomic system dysfunction
    • Altered functional or regional connectivity in the brain
    • Circadian system dysfunction
    • Dysfunction of energy metabolism

    This episode is produced by Sleep Review and is episode 5 of a 5-part series sponsored by Jazz Pharmaceuticals. Visit Jazzpharma.com and SleepCountsHCP.com for more information. In episode 5, listen as Sleep Review’s Sree Roy and neurologist-sleep specialist Isabelle Arnulf, MD, PhD, discuss:

    • Science doesn’t fully understand the pathophysiology of idiopathic hypersomnia. Research has revealed potential clues, however. For example, idiopathic hypersomnia is associated with changes in sleep staging and architecture. What does emerging science suggest are differences in nighttime sleep?
    • How might the arousal index differ in idiopathic hypersomnia versus in people without it, and why might that matter?
    • In addition to nighttime sleep dysfunction, other physiological changes have been observed in some patients with idiopathic hypersomnia and theorized as possible contributors to its pathophysiology. What is the GABAergic system and its possible role?
    • What are some emerging findings surrounding idiopathic hypersomnia and autonomic system dysfunction?
    • What is the evidence that supports the idea of altered functional or regional connectivity in the brain in people with idiopathic hypersomnia?
    • There were fascinating studies done on skin fibroblasts, suggesting that circadian period length may be different in people with idiopathic hypersomnia versus in people without it. What role might circadian rhythm dysfunction have in idiopathic hypersomnia?
    • What has science discovered about the possible role of dysfunction of energy metabolism in idiopathic hypersomnia?
    • What further research would you like to see conducted on the pathophysiology of idiopathic hypersomnia?

    Listen to Episode 1: Symptoms of Idiopathic Hypersomnia

    Listen to Episode 2: Diagnosis of Idiopathic Hypersomnia

    Listen to Episode 3: Differential Diagnosis of Idiopathic Hypersomnia

    Listen to Episode 4: Burden of Idiopathic Hypersomnia
    Show More Show Less
    15 mins
  • The Big Challenges Facing Clinical Labs

    The Big Challenges Facing Clinical Labs
    Aug 15 2023
    In this episode of Clinical Lab Chat, Chris Wolski, CLP’s director of Business Intelligence, David West, CEO of Proscia, and Lou Welebob, vice president and general manager of pathology at Agilent, take a deep dive into the big challenges facing clinical labs today, including workforce shortages, scaling lab operations, and reimbursement, along with some of their solutions, including increased automation, agnostic platforms, and more coherent reimbursement coordination with regulatory agencies.
    Show More Show Less
    28 mins
No reviews yet